Standard Plastisol Color

Ready-to-use colors

Description :
Ichoflex^® standard plastisol colors are formulated as ready printing ink for direct printing on 100% cotton and polyester/cotton white fabrics. The Ichoflex^® series is designed to get maximum printing speed and without ink-buildup on the back side of the screen when printed wet-on wet.

Application :
Apply a first down, opaque white underlay when printing on dark 100% cotton and a low bleed white underlay when printing on dark polyester/cotton fabrics.

Substrate :
100%. Cotton white fabrics, dark fabrics, Polyester/Cotton white fabrics.

Screen mesh :
230m.c./in. ( 90 m.c./cm )

Stencil :
Direct, indirect, capillary film.

Modification :
Ichoflex^® curable thinner, Ichoflex^® viscosity reducer, Ichoflex^® primer clear.

Wash up :
Mineral spirits/ non-hazardous screen washes / Ichoflex^® Wash LB.

Fusion :
320°F/ 160°C.

Special notes :
Ichoflex^® are thermoplastic, requiring heat for fusion. Test print an area of the fabric for crock fastness. If the color rubs off on a white cloth, adjust oven temperatures and / or give required time until the cloth wipes clean. Stir Ichoflex^® before printing. Do not dry clean and bleach.

Top

 High Opaque Colors

Four color printing

Description :
The Ichoflex^® high opaque colors are ready plastisol ink for printing on dark 100%. Cotton fabrics. The product is manufactured tack free for easy application on automatic and manual presses to give the brilliant opacity on fabric.

Application :
Print on dark 100% cotton fabrics straight from the container. Apply first down, opaque white low bleed underlay when printing on dark polyester/cotton fabrics.

Substrate :
100% cotton dark fabrics or low bleed underlay.

Screen mesh :
86-305m.c./in ( 34-120 m c/cm )

Stencil :
Direct, indirect, capillary film.

Modification :
Ichoflex^® curable thinner, Ichoflex^® viscosity reducer, Ichoflex^® primer clear.

Wash up :
Ichoflex^® Wash LB

Fusion :
320°F/ 160°C

Special notes :
Ichoflex^® are thermoplastic, requiring heat for fusion. Test print an area of the fabric for crock fastness. If the color rubs off on a white cloth, adjust oven temperatures and / or give required time until the cloth wipes clean. Stir Ichoflex^® before printing. Do not dry clean and bleach.

Top

 New Generation MS Color Lab

Description :
The Ichoflex^® new generation mixing colors are high performance, economical low-tack plastisol for 100%. Cotton light or dark fabrics.

It also gives best results with low bleed underlay white when printed on dark, 50/50 polyester/cotton blends. All 17 primary ink colors ( including black and white ) are primary ink and our handy recipe book is available for creating shades. By using Ichoflex^® new generation MS colors reduction in costs and increase in production speed can be achieved.

Application :
Ichoflex^® can be printed directly on 100%. Cotton white, light and dark fabrics.

Give low bleed white underlay when printing on 50/50 polyester/cotton blends, spot dry and use Ichoflex^® color on the top. Mix desire Ichoflex^® shade by weight, then print. It saves cost by means of extend colors as 30%. When printing on white fabrics.

Substrate :
100%. Cotton white and dark fabrics.

Screen mesh :
286-355m.c./in. (34-140 m.c./cm.)

Squeegee :
80 durometer

Stencil :
Direct, indirect, capillary film.

Modification :
Ichoflex^® curable thinner, Ichoflex^® viscosity reducer, Ichoflex^® primer clear.

Wash up :
Ichoflex^® Wash LB

Fusion :
320°F/ 160°C.

Special notes :
Ichoflex^® are thermoplastic, requiring heat for fusion. Test print an area of the fabric for crock fastness. If the color rubs off on a white cloth, adjust oven temperatures and / or give required time until the cloth wipes clean. Stir Ichoflex^® before printing. Do not dry clean and bleach.